Clean EnCounters is a ready to use spray cleaner for cleaning all types of stone surfaces such as granite and marble and it cleans all brands of solid surfaces such as: DuPont® Corian®, Wilsonart Gibraltor, Avonite, Swanstone, and Fountainhead. This unique formula will even clean laminate surfaces such as: Formica, Wilsonart, Nevamar, and Pionite. This cleaner is safe to use on food handling surfaces. It is perfect for daily cleaning tabletops, vanities, countertops, columns, and walls.

Tile & Grout Haze Cleaner is ideal for restoring and deep cleaning: Ceramic tile, porcelain tile and grout.

This highly concentrated product has a acidic pH that removes: soap scum, calcium build-up, efforescence, hard water spots, and grout haze. It will even penetrate into grout and remove mold, mildew, algae, and line deposits.

Dilute: 1 to 2oz of Tile Grout Haze Cleaner to 1gl of warm water.

Sealing Procedures for Countertops, Floors, Vanities & Walls:

• *Always test first in a small area for desired results before applying to entire surface.
• If your surface has any topical waxes or stains, they must be removed before sealing.
• Be sure that the surface is dry and clean before sealing. Surface must be dry for a minimum of 6 to 12 hours before sealing. It is safe to lightly clean the stone before sealing.
• Pour the Sealer directly onto the stone surface.
• Liberally spread the sealer on the surface using a dry, white terry cloth towel. The sealer may form a foaming/bubbling sensation while applying it.
• After five minutes, wipe off excess sealer.
• For more absorbent stones, apply one more application five minutes after the first application.
• If excess dries on the surface, apply more sealer onto the surface and wipe off immediately with a clean dry terry cloth towel. For large stone floors, excess can be buffed off with a clean white buffing pad or an all cloth bonnet pad.
• Floor surfaces may be walked on 4 hours after application. For best curing results, keep surface dry for 24-48 hours after application. 48 hours will provide best protection.

Benefits:

• Provides excellent stain protection.
• Acts as an excellent grout release.
• Prevents the growth of bacteria, mold and mildew on interior and exterior stone.
• Simple to apply and user friendly.
• Helps prevent adhesion and penetration of fluids and dirt.
• Safe for contact of membranes.

Applications:

Textures/Surfaces:

Applications:

Marble Granite Slate Terra Cotta Limestone Terrazzo Formica Agglomerates Sanded Grout Cement/Brick

Textures/Surfaces:

Applications:

Textures/Surfaces:

Applications:

Textures/Surfaces:

Recommendations:

Always test on a small area before using to determine if the product is applicable.

Test Area: Apply the SCI-TZ MARBLE POWDER to a small area at the project site in accordance to the manufacturer's directions on the bottle label. Be sure to record all the test results including coverage and stain prevention.

Natural stone should be protected with STONE SPRAY-N-SEAL penetrating sealer.

Follow the recommended SCI cleaning procedures for MARBALEX & MARBAMIST.

If heavy abrasions or scratches are on the surface, use HONEX prior to using the polishing powder.

While in the container, SCI-TZ buffing compound may absorb moisture and become hard. This will not affect the performance of the product.

Cover all surfaces that are not stone.

Always wear protective clothing such as safety goggles, gloves, and footwear.

Approximate Sq. Ft. Per Pound Coverage:

Agglomerates 500 sq. ft.

Terrazzo 500 sq. ft.

Applications:

Directions:

Preparing the Surface:

SCI-GL powder should be used with a white, natural, or felt buffing pad. White polyester works the best.

Approximate usage is one ounce per three square feet.

Be sure to remove all coatings, dust, and loose sediment from the surface prior to applying the powder.

Always work small areas at a time until you become familiar with the product.

Apply 4 ounces of water to the surface and apply one half of a cup of SCI-GL Powder to the water and work it together to form a slurry.

The slurry should remain milky throughout the buffing process. Add water if necessary.

To check the results, move the slurry with a squeegee and reapply if more buffing is necessary.

When desired results appear, push the slurry to another work area or pick it up with a wet/dry vacuum. For floor surfaces, rinse immediately with Marbalex. For countertop surfaces, rinse with Marbamist.

Buff the completed area with a clean dry white pad.

Approximate Sq. Ft. Per Pound Coverage:

Granite 600 sq. ft.

Agglomerates 600 sq. ft.

Terrazzo 600 sq. ft.

Directions:

Preparing the Surface:

SCI-GL powder should be used with a white, natural, or felt buffing pad. White polyester works the best.

Approximate usage is one ounce per three square feet.

Be sure to remove all coatings, dust, and loose sediment from the surface prior to applying the powder.

Always work small areas at a time until you become familiar with the product.

Apply 4 ounces of water to the surface and apply one half of a cup of SCI-GL Powder to the water and work it together to form a slurry.

The slurry should remain milky throughout the buffing process. Add water if necessary.

To check the results, move the slurry with a squeegee and reapply if more buffing is necessary.

When desired results appear, push the slurry to another work area or pick it up with a wet/dry vacuum. For floor surfaces, rinse immediately with Marbalex. For countertop surfaces, rinse with Marbamist.

Buff the completed area with a clean dry white pad.

Approximate Sq. Ft. Per Pound Coverage:

Granite 600 sq. ft.

Agglomerates 600 sq. ft.

Terrazzo 600 sq. ft.

Recommendations:

Always test on a small area before using to determine if the product is applicable.

Test Area: Apply the SCI-M2 MARBLE POWDER to a small area at the project site in accordance to the manufacturer's directions on the bottle label. Be sure to record all the test results including coverage and stain prevention.

Natural stone should be protected with STONE SPRAY-N-SEAL penetrating sealer.

Follow the recommended SCI cleaning procedures for MARBALEX & MARBAMIST.

If heavy abrasions or scratches are on the surface, use HONEX prior to using the polishing powder.

While in the container, SCI-M2 buffing compound may absorb moisture and become hard. This will not affect the performance of the product.

Cover all surfaces that are not stone.

Always wear protective clothing such as safety goggles, gloves, and footwear.

Preparing the Surface:

Be sure that the surface is free from loose debris and sediment.

Dust/dry mop the floor at least two times daily.

Applications:

Textures/Surfaces:

Recommendations:

Always test on a small area before using to determine if the product is applicable.

Test Area: Apply HONEX to a small area at the project site in accordance with the manufacturer's directions on the bottle label. Be sure to record all the test results including coverage and stain prevention.

Natural stone should be protected with STONE SPRAY-N-SEAL penetrating sealer.

Follow the recommended SCI cleaning procedures for MARBALEX & MARBAMIST.

If heavy abrasions or scratches are on the surface, use HONEX prior to using the polishing powder.

While in the container, Honex Honing Powder may absorb moisture and become hard. This will not affect the performance of the product.

Cover all surfaces that are not stone.

Always wear protective clothing such as safety goggles, gloves, and footwear.

Approximate Sq. Ft. Per Pound Coverage:

Marble 200 sq. ft.

Agglomerates 200 sq. ft.

Terrazzo 200 sq. ft.

Applications:

Textures/Surfaces: