Stone and Tile Maintenance Products
Natural Stone & Tile Cleaners & Refinishers

Custom® Building Products is committed to environmental responsibility — in the products produced and in manufacturing practices. Under this philosophy, we search continuously for ways to reduce the burden on the environment and promote sustainability. Custom’s Build Green™ program is a leading model in the construction industry, supplying customers with environmentally-friendly products and the peace of mind that they are contributing to a cleaner world.

Removes acrylic and wax floor finishes or light grout haze and residue. Concentrated for tough cleaning. Safe for grout, tile or stone.

Tile Types

Tile, stone, grout, cement, masonry, and vinyl flooring

The polished granite counter kit includes everything needed to optimally protect and shine polished stone counter by hand. Perfect for maximum protection and shine on kitchen counters, vanities and vertical stone walls decorative stone fixtures. Hides light etching and restores the lustrous finish.

Formulated to best work on polished granite, but can be used on all stones such as, marble, travertine, limestone, onyx, terrazzo. Do Not Use On Floors

• Ultimate 2-part protection and polish system
• Excellent for fabricated slab countertops
• Enhances reflective shine of polished stone

CLOSE OUT SALE

$39.99

TileLab Matte Sealer & finish protects and leaves a Matte finish

Use On: Saltillo, Terra-Cotta, Quarry tile, slate and Flagstone. Protects against stains, dirt and grease and provides scratch resistance. For interior dry areas only.

Surface Preparation: Surface should be clean, dry and free from , waxes, or finishes. Do not apply directly over silicone sealers, oil or wax bases finishes.

Application: Existing installation: apply 2-3 thin, even coats of finish with a clean sponge, mop or lambs wool applicator. allow 1-2 hours drying time between coats.

Application: New installation: Saltillo, terra-cotta and clay pavers are very porous and can be stained by grout if not sealed first. apply 2-3 thin, even coats of finish before grouting as directed. Allow final coat to dry at least 2 hrs before grouting. allow grout to cure at least 48 hours then apply an additional coat.

Coverage: Approximate 150-250 sq ft per 64oz bottle

High-gloss, protective finish and surface sealer for Saltillo, terra-cotta, quarry tile, slate and flagstone. Seals the surface to resist stains, dirt and grease. Beautifies and enhances color while providing scuff, mar and scratch resistance. This acrylic, water-based finish has low odor and will not yellow with age. For interior dry areas only.

Surface Preparation: Surface should be clean, dry and free from , waxes, or finishes. Do not apply directly over silicone sealers, oil or wax bases finishes.

Application: Existing installation: apply 2-3 thin, even coats of finish with a clean sponge, mop or lambs wool applicator. allow 1-2 hours drying time between coats.

Application: New installation: Saltillo, terra-cotta and clay pavers are very porous and can be stained by grout if not sealed first. apply 2-3 thin, even coats of finish before grouting as directed. Allow final coat to dry at least 2 hrs before grouting. allow grout to cure at least 48 hours then apply an additional coat.

Coverage: Approximate 150-250 sq ft per 64oz bottle

TileLab SurfaceGard penetrating Sealer inhibits mold and mildew growth for interior and exterior high use areas.

SuraceGard provides unsurpassed, invisible protection for marble, stone, porcelain, granite, grout and tile. Interior and exterior use.

Surface Preparation: Always test in an inconspicuous area. Surface should be clean , dry and free from efflorescence, waxes, coating or finishes. Allow grout to cure at least 48 hrs.

Applications: Apply liberally using a new mop, lambs wool applicator, or sponge. Allow it to penetrate for up to 5 minutes. Immediately wipe off any sealer completely before it dries. Drying time 2 - 3 hours

Coverage:

• 32oz Approximate 200-300 sq ft
• 64oz Approximate 400-600 sq ft
• 1gl Approximate 800-1200 sq ft

Tile Types: All stone surfaces, unglazed tile, porcelain, clay pavers, concrete, brick, masonry, grout

R-Teez® cleans ANY surface stains like these from your tile grout instantly using no chemicals!

• Coffee stains
• Calcium
• Wax buildup
• Dirt buildup
• Organic stains
• Mildew
• Algae
• Soap scum
• Red Clay
• Rust

R-Teez® restores your grout to it's original color!Works both wet or dry, sanded or unsanded, sealed or unsealed grout -- any color! Simply "erase" the stain from the grout surface and watch as the stains magically disappear.

Instructions:
Simply hold at a 45 degree angle. Rub gently on stained area.
For easy cleanup, dry brush or vacuum.

To resharpen, rub on any concrete surface.

Not for use directly on tile -- use on grout only.
Cleans approximately 500 lineal feet.
Each package contains 2 bars:
4-1/2" x 3" x 1/2" & 4-1/2" x 3" x 1/4"

R-TEEZ Tile Grout Cleaner

This product contains more than 200 billion enzyme producing bacteria per gallon and can eradicate odors in just minutes. As in nature, UR-IN-CONTROL enzymes digest the source so that foul PET and HUMAN orders disappear forever

UR-IN-CONTROL is 100% Biodegradable. Non-toxic, non-caustic, non-acid, and non-polluting.

Use on urine,vomit,fecal matter, perspiration and more.

Eradicate odors in and around carpets, floors, furniture, toilets, urinals, sinks, counters, drains, garbage/waste areas, pet areas and sick-rooms.

Easy To Use: Remove any soiled matter from surface. Clean surface as necessary to remove stains. Spray area with UR-IN-CONTROL and allow to remain on surface: do not wipe. The natural paste color of these enzymes will not stain carpets, floors or walls.

NOTE: always test an inconspicuous area first to ensure applicability.

32 oz. Ready to use